HyperClouds
by SubSpecular
€15
Procedural clouds for Blender. Pick the kind, or draw it. A real volume, any size.
Put the 3D cursor where the base of the cloud goes and press Add Cloud. You get a cumulus with a nearly flat, ragged base, cauliflower domes and soft edges, built as a real volume that Cycles lights from any side. Choose the kind of cloud first: from a flat fair-weather cumulus to a towering congestus, a ragged fractus or a patch of stratocumulus. Or press Draw Cloud and draw it: every stroke becomes cloud. Every seed is a different cloud, and the same seed gives the same cloud at any size, 12 units wide or 120.
What you get
A Blender extension, version 24.3.4, for Blender 4.2 LTS or newer (tested on 4.2, 4.3, 4.4, 4.5, 5.0, 5.1 and 5.2). The full cloud engine, with the cauliflower detail, needs Blender 5.0 or newer
Add Cloud: a new cloud for every seed, its base on the 3D cursor
Six kinds of cloud: Cumulus, Cumulus humilis, mediocris, congestus, fractus and Stratocumulus
Draw Cloud: one click and you draw; lines and closed outlines become cloud as you draw them
Export VDB: the real volume of any cloud as an OpenVDB file
Four qualities: Ultra for the hero cloud up close, High, Medium and Low for the ones further away
Guide Mode: grow a cloud along a curve or a Grease Pencil stroke, or inside any mesh
Bake Billboard: turn far clouds into cards with their picture, placed exactly where the cloud was in the shot
Optimize Cycles: the render settings clouds need, in one click: Final for the render you keep, Fast for previews
Interface in English and Spanish
Cycles
Six kinds of cloud
Pick the type in the list above Add Cloud. The proportions are the ones of the WMO cloud atlas and the Met Office, measured on the clouds the add-on makes (height to width, 6 seeds each):
Cumulus: the classic HyperClouds cloud, a main tower and lower domes. You set the Height.
Cumulus humilis (0.31): fair weather, flattened, wider than tall, tops at nearly the same level.
Cumulus mediocris (0.82): as tall as wide, small sprouting domes on top.
Cumulus congestus (1.38): taller than wide, a bulging cauliflower tower with turrets at different heights.
Cumulus fractus (0.59): small and ragged, frayed edges, no flat base.
Stratocumulus (0.12): a flat patch of rounded masses, mostly merged, with flat tops and a few gaps.
Height Scale makes any type taller or flatter.
Draw it
Press Draw Cloud and you are drawing, with Blender's own Draw tool, on a plane through the 3D cursor facing the view. Every stroke becomes cloud when you lift the pen.
A line grows a cloud along it, thicker in the middle and thinner at the ends.
A closed outline is filled: the cloud takes the silhouette you drew, thick in the middle and thin at the edges. Measured on an outline 12 × 5: the cloud matches it in 82 % (39 % without filling).
Brush Size sets the size of the puffs; the domes, the turbulence and the voxels follow it. A tablet pen can drive it (Pen Pressure).
Finish Drawing and you are back in Object Mode with the cloud selected. Draw More adds strokes later. The stroke is an ordinary curve, hidden from the render, and moves with the cloud.
Export to VDB
Export VDB saves the real volume of the selected clouds, one file per cloud, for Houdini, EmberGen, Unreal or any renderer that reads OpenVDB. One grid, density, from 0 to 1; in the cloud's own space or in world space. A cloud 12 wide: High in 1.9 s (11 MB), Ultra in 8.7 s (46 MB). Read back, the file gives the same grid, voxel by voxel.
Made to look like real cumulus
The shape is measured. It was tuned against a set of fluid-simulated cloud volumes: a lobed, elongated footprint, an off-centre main tower and lower domes around it. With the Height at a third of the width, height to width comes out at 0.34 (the simulated clouds: 0.33) and the short side of the footprint at 0.71 of the long one (0.62).
A real cumulus base. Nearly horizontal from far away; seen from below, lumpy, with ragged wisps and a soft edge, not a flat plate. Measured on the same simulated clouds: the bottom 3 % of the height holds 0.20 of the area of the widest slice (simulated clouds 0.30; a flat plate is near 1), and the edge of the base fades over 5.4 % of the height (6.6 %).
Cauliflower detail on the surface, in up to four sizes, bent by turbulence so the domes are not perfect spheres. Push Turbulence as far as you like: it saturates softly, and the domes never fold into crumpled paper.
Like a real cloud inside: thinner near the base and denser higher up, with uneven density.
No floating blobs. Measured on clouds 6 to 40 units wide: no piece of cloud floats apart from it. The few bits bigger than 1 % of the width are wisps and dome tips touching its edge (at most 0.5 % of the width away).
The same cloud at any size. Voxels, domes, turbulence and density follow the width. Measured: the same seed at widths 6, 12, 24 and 120 (Height in proportion) has the same volume, 0.112 times the width cubed, and rendered 12 and 120 wide (camera ten times further) it gives the same picture.
Real light
Light scatters inside the volume with two lobes: the silver lining when the sun is behind the cloud, and the bright side facing the sun. Both have a slider.
Optimize Cycles sets 32 volume bounces. With few bounces clouds render grey and flat, and the panel warns you in red. Final (the default) renders 128 samples for clean animation; Fast, 32 for previews. Both use an animated seed, so the grain does not stick to the screen when the camera moves, and in Blender 5.x they keep the unbiased volumes, which stay fast with many clouds.
Light where it matters
Viewport Proxy: in the viewport the cloud is a few light spheres, so the scene stays fluid. F12 and the Rendered view use the real volume.
Build time of the volume for a cloud 12 wide (Blender 5.2, 20-thread CPU): Low 0.18 s, Medium 0.46 s, High 1.4 s, Ultra 6.3 s.
A cloud in 9.2 s with Optimize Cycles Fast, 22 s with Final: 1920×1080, High quality, sky and ground included (RTX PRO 5000).
A sky of 177 clouds in 10 s per 1920×1080 frame with Fast (33 s with Final; Persistent Data on), with High near the camera and Medium and Low far away. The first frame also builds the 177 volumes: about 70 s.
Billboards: eight far clouds rendered with Final in 10 s as volumes and 3.0 s as billboards, with practically the same picture (mean difference inside the clouds under 2 %).
The panel
3D Viewport > Sidebar (N) > HyperClouds.
Cloud type list, Add Cloud and Draw Cloud. In Adjust Last Operation: Cloud Type, Seed, Width, Height (or Height Scale), Quality
Optimize Cycles (Quality: Final or Fast, in Adjust Last Operation), with a red warning when the scene has too few volume bounces
Shape: Viewport Proxy, Voxel Size, Cauliflower, Cauliflower Size, Cauliflower Detail, Fine Cauliflower (Ultra), Turbulence, Flat Base, Denser on Top, Density Variation
While drawing: Brush Size, Stroke Taper, Fill Outline, Fill Depth, Pen Pressure, Finish Drawing
Guide (draw / object): Guide Mode. When it is on, only what your guide uses: Guide Object, Puff Size, Spread and Seed, plus Guide Density for a mesh, or Puff Spacing and the stroke settings for a curve or a Grease Pencil drawing
Shading: Density, Silver Lining, Sun-side Glow
Bake Billboard, Re-bake Billboard and Export VDB
Update Cloud Engine, only for clouds made with an older version
More settings are in the Geometry Nodes modifier of each cloud: turbulence layers, edge softness, and the base (lumps, swirls, wisps, domes, rounding, softness).
Install
Keep the ZIP as it is (do not unzip it).
Blender > Edit > Preferences > Get Extensions, click the arrow (⌄) at the top right and choose Install from Disk...
Select the ZIP. The HyperClouds tab appears in the 3D Viewport sidebar (press N).
No internet connection needed. To update, install the new ZIP the same way.
How to use it
Put the 3D cursor where the base of the cloud goes (Shift + right click).
Sidebar (N) > HyperClouds: choose the cloud type, then Add Cloud.
In Adjust Last Operation (bottom left, or F9) choose the Seed, the Width, the Height and the Quality.
Press Optimize Cycles once per scene. It sets Final; for quick previews choose Fast in Adjust Last Operation.
Render with F12, or look at it in the Rendered viewport.
To draw one: Draw Cloud, draw in the 3D view (through the camera is best), then Finish Drawing.
The ZIP includes a full guide (README): install, update and uninstall, cloud types, drawing, every setting of the panel, Guide Mode, billboards, VDB export, render tips and troubleshooting.
Good to know
No animation yet. The clouds stand still: no wind, no growing shape and no loop.
Low clouds only: cumulus of every kind and stratocumulus. No stratus, cirrus or storm anvils, and no one-button sky: a sky is many clouds.
Made for Cycles. EEVEE shows the volume but scatters light only once, so the clouds look grey there.
Up close it is softer than a simulation. Next to a fluid-simulated VDB seen from very near, the fine detail is softer, the underside too. Use Ultra for the cloud the camera looks at.
Drawn outlines are filled in one plane: the plane of the view you started drawing from, with depth in proportion.
Billboards are pictures: right from the camera they were baked from, and they cast no shadow.
Blender 4.2 to 4.5 get a simpler engine without the cauliflower sliders: the cloud types only change the proportions, drawn strokes are clouds along the line (no filling), and Grease Pencil guides need 4.3 or newer.
What is in the download
hyperclouds_v24_3_4.zip: the extension, with README (guide), CHANGELOG and LICENSE inside.
Blender 4.2 LTS or newer (full cloud engine from 5.0). Cycles. GPL-3.0-or-later.